NEMA34 1.8 Degree Stepper Angle 86mm Hybrid Stepper Motor With Screw

NEMA34 1.8 Degree Stepper Angle 86mm Hybrid Stepper Motor With Screw

Description:

This is an 86mm hybrid stepper motor with trapezoidal screw.

Its step angle is 1.8 °/step, and it takes 200 steps to rotate 1 turn.

Its lead screw is 12.7mm, which means that when the motor rotates one revolution, the nut moves 12.7mm.

Therefore, step length=lead/200 steps=0.0635/step, which means that when the motor completes a full step, the guide screw nut will undergo a linear motion of 0.0635mm.

The nut is made of self-lubricating plastic material (PPS) and can withstand both high thrust and small friction.

Motor parameters:

Lead screw parameter:

Design drawing:

Product display:

Application of stepper motor:
Stepper motors are used for precision control and are widely used in medical equipment, 3D printers, industrial precision control, automation equipment, etc.
Stepper motors can be used in any mechanism that requires precise control and rotational/linear motion.

Advantages of stepper motors:
Stepper motors can be precisely controlled and brushless even without a closed-loop encoder/feedback system. Therefore, there are no electromagnetic interference and spark problems. In some cases, they can replace DC brush/brushless motors.
The stepper motor is easy to be controlled by the driver and has established its important position in the field of precision control.
1. Precise control and programmable
2. No electromagnetic interference and sparks
3. Small size
4. Reasonable price
5. Low noise
6. Long service life

86mm Hybrid Stepper Motor

NEMA34 Hybrid Stepper Motor

Screw NEMA34 Stepper Motor

NEMA34 1.8 Degree Stepper Angle 86mm Hybrid Stepper Motor With Screw Images